Energy Saving Large Flow Emergency Diesel Type Rescue Pump Truck

Large flow emergency rescue pump

The large flow emergency rescue pump adopts a grinding structure design, can run dry for 30 minutes, and can suck shallow water and air-water mixture. This type of water pump solves the problems of large axial tension, long self-priming time, and low efficiency of single-suction self-priming pumps. It has the advantages of high suction range, short self-priming time, high efficiency, energy saving, stable operation, and long service life.

This type of water pump is suitable for various complex emergency rescue, fire fighting and other occasions. It is not affected by factors such as power supply and site of use. It can be moved for operation and has high flexibility.

The large-flow emergency rescue pump is a high-efficiency, energy-saving, self-priming and strong sewage discharge pump with the advantages of simple and compact structure, low vibration, easy use and maintenance. It is widely used in various emergency rescue scenarios, such as urban waterlogging, river and lake drainage, farmland irrigation, etc. This article will introduce the knowledge of the startup method, key points of use and maintenance of the large-flow emergency rescue pump.

First, let's learn about the starting method of the large-flow emergency rescue pump. Before starting, you need to inject engine oil into the diesel engine and the water pump suspension, and use the oil dipstick to check the oil level to meet the required height; add cooling water to the diesel engine, and the water level should be 2/3 of the height of the expansion tank; put diesel in the tank, press the exhaust hand pump, and let the diesel enter the engine through the filter; connect the diesel engine water pump inlet and outlet pipes and gate valves, close the gate valve of the water outlet pipeline, the outlet pressure gauge and the vacuum pressure gauge; fill the diesel engine water pump and the water inlet pipe with water or vacuum water, and empty the internal air; open the external circulation cooling water valve, start the diesel engine water pump with the inlet valve fully open and the outlet valve closed, and gradually open the valve on the outlet pipeline when the diesel engine reaches normal speed, and adjust it to the required working conditions.